Knoll k.stand Height-Adjustable Table User Manual

Knoll k.stand Height-Adjustable Table User Manual

Important Information. SAFETY FIRST!

Your safety and the safety of others are very important. Please familiarize yourself with all instructions and safety warnings before operating the table. Please keep this manual for future reference. To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this user’s manual. This information alerts you to potential hazards that could hurt you or others. It is not practical or possible to warn you about all the hazards associated with operating or maintaining a table. Please use your own good judgment. You will find important safety information in a variety of forms. Safety Messages are preceded by a safety alert symbol and one of three signal words: DANGER, WARNING, or CAUTION. These safety messages are listed in order of severity, identify the general risks and what actions you are to take to avoid the risks. These signal words mean: DANGER Indicates an imminent hazard with a high risk of serious injury or death. WARNING Indicates a potential hazard that could result in serious injury. CAUTION Indicates a potentially hazardous situation, which could result in minor or moderate injury. It may also be used to alert against unsafe practices. NOTICE Indicates an alert to call attention to proper assembly instructions or particular operation procedures to assure correct equipment function and to avoid equipment damage or wear. The information and specifications included in this manual were in effect at the time of approval for printing. ROL reserves the right to discontinue or change specifications or design at anytime without notice and without incurring any obligation whatsoever. Please save these instructions. When using an electrical table, basic precautions should always be followed, including the following: Read all instructions before using table. DANGER—To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning or servicing. WARNING—To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Unplug from outlet before putting on or taking off parts.
2. This table is not intended for use by children or individuals with a physical or other impairment that may affect the ability to safely operate equipment.
3. Use this table only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
4. Never operate this table if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or exposed to water. In the event of any such event please return the table to a service center for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never operate the table with the air openings blocked. Keep the air openings free of lint, hair, and the like.
7. Never drop or insert any object into any opening.
8. Do not use outdoors.
9. Do not operate the table in a potentially explosive atmosphere.
10. To disconnect, turn all controls to the off position, then remove plug from outlet.

1. Do not use this table to lift people and do not use the table to lift heavy parts or use this table as a platform for storage.
2. Maximum intended load is 265 pounds uniformly distributed (120 kilograms) including the table top.

1. Improper usage, abuse, or misuse of the power supply, handset, motors and other electrical components may result in an electrical shock injury or possible death.
2. Do not open the power supply unit or handset under any circumstances. The power supply and handset contain no serviceable parts.
3. Do not modify or make any changes to the power supply, handset or other electrical devices.
4. During installation, repair, cleaning, or maintenance work, the power cable must be disconnected from the outlet.
5. The engines/motors control unit is not designed for continuous operation. Changing the desktop position without interruption must not exceed the duty cycle indicated on the power supply. The unit is thermally protected and will temporarily shut down if use exceeds the duty cycle. Allow a 9-minute cooling period for the control unit to reset.
6. The power supply unit may only be operated with voltage as specified on the power supply label.
7. Only use the power cord supplied with the power supply. Check that it is not damaged. Do not operate the power supply unit if the power cord is damaged.
8. Connect the power supply to a proper outlet only. To disconnect turn all controls to the off position, then remove plug from outlet.
9. In the event of a malfunction (e.g. if the control unit keeps adjusting the desk because a movement button has jammed), please unplug the unit immediately.
10. Do not expose the power supply, control unit/ECS+, handset or other electrical device to water or other liquids including moisture, drips, splashes or spills. Only clean electrical device with a dry cloth.
11. Do not operate the power supply, control unit/ECS+, handset or other electrical device in a potentially explosive atmosphere. Do not operate where aerosol spray products are being used or where oxygen is being administered.
12. Do not use the desk with if it has been dropped or damaged. Contact the manufacturer for examination or repair.
13. It is not allowed to connect self-constructed products to the power supply, control unit/ECS+, handset or other electrical device. To prevent damage, use only components recommended by the manufacturing company.

1. During the raising or lowering of the table there exists a risk of squeezing or pinching between the moving desktop and fixed objects.
2. The necessary safety margins depend on the greatest type of injury risk that can be predicted. Where possible small pinch points exist (i.e. fingers) use at least a one inches (2,5 cm) safety margin and for body or head (especially where children may be present) use a minimum of 16 inches (41 cm) count from the floor or from their top of the table feet if that is relevant.
3. During the lowering or rising of the desktop, the operator must ensure that no person or object risk being harmed by the operation.
4. This tag (at right) should be located on the table during the initial installation.
5. Keep children away from moving parts and underneath the table.
6. The intended use of the table is adjusting a work surface between sitting and a standing position. The table is not designed for other uses.
7. The table must only be operated while in an upright position and must under no circumstances be operated while upside down.
8. The table must not be overloaded. The maximum allowable load is shown on the power supply label.
9. The table must be operated in a dry, enclosed space, such as an office or similar; Do not operate outdoors.
10. The table is equipped with an Anti-Collision (AC) function. In the event of a faulty the desktop may move slightly before the safety feature is engaged. Stay clear of pinch points when the desktop is moving.
11. This table is not intended for use by individuals (including children) with limited physical, sensory or mental abilities or with a lack of experience and/or lack of expertise, unless they are supervised by a person responsible for their safety or have received instructions from that person on how to use the control unit.
12. Children must be supervised at all times to ensure that they do not play with the control unit.
13. The table may not be used to lift people. Do not sit or stand on a table while it is be raised or lowered.
14. The table must not be structurally or technically altered or modified in any way.

Assembly & Adjustment

Assembly Instruction The official assembly instruction will be found with the base components. Make sure to ask your desk vendor for an approved combination of desktop and frame. Setup procedureCAUTION—Risk of electrical shock: The power cord must be unplugged while the control unit is being commissioned. This table is equipped with ROL ECS+ system, to setup the controlling device proceed as follows.

1. Connect the motor cables to the control unit 8-pin motor cables (2). When there are 2 motors, connect to socket 1 and 2.
2. Connect the handset to the relevant socket on the control unit / ECS+
3. Connect the Power Supply to the control unit / ECS+
4. Connect the power supply to the outlet.

• The voltage must be as specified on the power supply label.
• When the power cord is plugged in, the electrical control devices are operational.

1. Power Supply
2. Motor cables
3. Handset
4. Control unit

Operation Instructions

To ensure safe operation of the ECS+ control unit, please observe the following safety instructions: CAUTION—Risk of injury and electric shock Keep children away from electric height-adjustable desks, control units and handset. CAUTION—Risk of pinching When you change the desktop position (especially without using pinch protection), you must ensure that no people or objects are located in the hazardous area nor may reach into it. NOTICE In case of a main power breakdown, or if the power cord is unplugged during the movement of the drives, a manual reset may be necessary! Please see section 3.2. NOTICE The control unit might be damaged by power surges. Unplug the power cord during a thunderstorm or if you do not intend to use the desk for a longer period. Basic functions NOTICE You must read the user manual carefully before installing or operating the control unit. If chosen handset doesn’t fit to this user manual, please see separate user manual for actual handset. Overload protection! If the total load on the equipment is too high you will only be able to drive for 2 seconds. The system will then stop and you need to take weight off the table. After some weight is removed, adjust the table again. Overheat protection! If heavy loaded and driven continuously for a long period of time the motor may overheat. The software registers this and, if overheated, system will shut down and you will have to wait 9 minutes before being using the table again. Anti-Collision “AC”! The ECS+ is equipped with intelligent software for pinch protection. If a collision is detected system will stop and back off about 1 inch. IMPORTANT! Make sure to remove the blocking item causing the pinch before trying to operate the table again. Failure to do so may cause injury to user or equipment. Upward desktop movement This function enables you to adjust the desktop upwards. To change its position, proceed as follows: Press the handset “up” button. Keep pressing the button until the required desktop height is reached. NOTICE The desktop will continue moving upwards until you release the button or the maximum height is reached Downward desktop movement This function enables you to adjust the desktop downwards. To change its position, proceed as follows: Press the handset “down” button. Keep pressing the button until the required desktop height is reached. NOTICE he desktop will continue moving downwards until you release the button or the minimum height is reached. Simple memory, end positions ECS+ have editable memory for high and low (sit or stand) positions. This setting can also be used to avoid collision with furniture (e.g. a cabinet/pedestal) How to set memory: Drive your table to the level you will store. Press both buttons 3 times (0.5-1 second between each pressing) Do the same procedure for your second store. The table will do a gentle rise to confirmation the setting. To erase the setting, please follow manual reset as section 3.2 To drive the table outside the memory setting: Press the “up” or “down” button for 5 seconds to move beyond the preset. Advanced functions, Manual reset In case of exchanged parts (e.g. motor, electronics) there could be a need of a manual reset so columns and handsets correspond to each other. Even poor connection of the cables could create a need for resetting. CAUTION—Risk of pinching

Maintenance & Repairs

• Inspect columns for loose connections and damaged plugs/wires.
• Inspect power supply for loose connections and damaged plugs/wires.
• The power supply and the handset is sealed and maintenance free.

• the power supply and the outlet.
• the power supply and the control unit / ECS+.
• the handset and the control unit / ECS+.
• the columns/motors and the control unit /ECS+.

• Soft start Progressive acceleration allows for soft starts and stops.
• Speed the speed of the table varies with load.

Appendix

Accessories, Series EE, ECS+ Control unit: ECS+ White cover, black base P/N see the chart below Width x depth x height 4,02" x 3,68" x 1,01", 2,50 oz. (100x91x27mm)

Handset: ECS+, black P/N 68005680 Width x depth x height 2,76" x 1,99" x 0,88, 2,46 oz. (70x50,5x22 mm) Cable length 47" (1200 mm) Power supply: For 40mm/sec speed P/N 68003761 Length x width x height 6,00" x 2,32" x 1,34", 12.63 oz. Power supply: For 32mm/sec speed P/N 68002264 Length x width x height 4,52” x 2,16” x 1,49”, 11.64 oz. Cables: Length 118" (3000mm) (primary side) P/N 68002262 separately item, 4,86 oz. Cable length secondary side at power supply 68002264 L= 20"(2000mm) (68002235 L= 80-½" (500mm)) Dimensions column system: Series EE, ECS+ with 665 stroke Bifma Dimensions column system: Series EE, ECS+ with 420 stroke Performing a Reset